We have a lot of application errors in terminal server. They are connected with ntdll.dll. Google says that display driver may be a possible cause. Now we use Standard VGA adapter (vgapnp.sys) and device manager shows no errors. I downloaded from Intel Infinst_autol.zip - with a lot of inf and cat files. Which one of them is display driver?
Thanks for any Help.
Hi Everyone
I have an Intel RAID card RT3WB080 which has two RAID5 arrays of 4 x3TB drives each, total 8 drives, installed on my workstation.
I have a spare Intel RAID card RS2WG160 with SSD cache key installed, that supports upto 16 drives.
I want to port my 2 RAID arrays to the spare card on the same desktop and expand the array.
Is this possible without destroying / recreating the array.
Look forward to your input and suggestions.
Thanks
Gurvesh
I am upgrading an older system for graphics, Photoshop/Premiere.
Some RAM concerns; they are readily available as Dual Ranked 4x or 8x. But I can't find the motherboard limits on total ranks. ...Having trouble understanding some specs...
Am also told on other forums that although not listed as beyond DDR3 1333 capable, DDR3 1600 will work. 1600 are all that are readily available.
With twelve slots I would like to run twelve "DDR3 PC3-12800 • CL=11 • Dual Ranked • x8 based • Registered • ECC • DDR3-1600 • 1.35V • 1024Meg "
They are available as 8x or 4x, both Dual Ranked.
A bit more info: 'am still investigating all possibilities, but hope/intend to upgrade from DualE5620 2.4GHz Dual Quad processors up to 5690's.
From a nvidia FX1800 card to a GTX 980 Ti Hybrid graphics card.
And from a WD Veloci Raptor SATA HD to a 1Tb WD Blue Pc SSD
An obvious novice, any help, cautions, suggestions will be appreciated!
Thank you.
I have a client running Windows Server 2008 on an S3420GPLC system board with two 150G WD Raptor drives in RAID1
using the embedded RAID controller setting in BIOS. .
The client is running ACT 2012 CRM and lately the performance is very slow.
I'd like to add an SSD drive to the system so that it comes up as D: and is not a part of any RAID. I plan to move the ACT
indices folder (contains index files for the ACT application running SQL server express 2008) to the SSD D: drive to try to improve ACT performance.
Can I connect the SSD to the on-board controller and get this working? If not, what do I need to add SSD connection via PCI slot?
Hi There,
Will Intel® Dual Server Board S2600CW2SR support SAS 600GB 15K RPM HDDs and also want to know about implementing RAID 5 on this board. Since this board comes with RAID 0,1 and 10. can anyone help me out with this.
Trying to update board from R02.02.0002 to R02.05.0004 or R02.06.0005 but receive the attached error. BMC updated fine. Any help would be appreciated.
Hi geeks,
I got Windows server 2012 R2 installed in Intel server board S1200SPL successfully, and all drivers are up to date. the latest drivers are from link Downloads for Intel® Server Board S1200SPL . but when I open Rapid Storage Technology Enterprice software, BSOD occurs with error : DRIVER_IRQL_NOT_LESS_OR_EQUAL(iaStorA.sys). people recommended to downgrade the driver, which I have tried, but it still does not work.
In BIOS settings I chose RAID -> RSTe not AHCI, cuz I need to set RAID5 for storage partition.
Thanks in advance.
Regards,
Terrence
Hi!
Im about to reinstall my server from 2012r2 to 2016, does anyone know if this will work? I cant find any drivers for Windows Server 2016 on the support page.
Hi,
I've just been given an ancient, refurbished S2600CP2J motherboard complete with CPUs and RAM and would like to get it fully working again.
The obvious first step is to update the BIOS but the oldest EFI update package available (01.02.003) states that I need to have at least version 01.01.1002 before starting or "the update process may render the system not operatable!"
According to the BIOS screen, my system is currently SE5C600.86B.99.99.x034, build date 08/23/2011.
As I have no wish to kill the system before I get started, is there any way of upgrading it to 01.01.1002 as a minimum?
Thanks.
I have a Dell Precision 3420 PC which already has a RAID 1 installed via Rapid Store Technology and windows 7. I am going to install VMWare ESXi but it does not support "software" RAID. So I purchased an RMS25KB040 RAID controller and installed it. On boot, I do not see the option to get into the BIOS (Cntrl+C). Would anyone know why? I am concerned that this LSI chipset is not supported by this motherboard. I also wondered if I would have to Disable the RAID on the Main Board? Is it possible that the on-board RAID is stopping the newly installed RMS25KB040 RAID controller from working.
All power supplies has "Unknown Device"
SCM1, SCM2, SWM1, SWM2 removed for testing...
Dear,
I'm busy configuring my N-Able enviroment to monitor my servers. Currently i'm running into an issue regarding SNMP and physical disk health.
I've configured the server with the software:
The server is running Windows Server 2012 R2 Standard x64.
I can monitor everything else just fine, the fans, temprature and the PSU's work. The only thing i cannot monitor are my Disks an RAID configuration.
I have installed and configured the SNMP service.
Am i calling on the wrong OID's? The OID's that are getting queried by my monitoring software are as follows:
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15
I have tried a manual request with these OID's and i got a No Such name error Which could mean i'm missing the required mib's
So i'm wondering, have i missed some software? Or is it because my OID's arent right?
Thanks in advance,
Ferdi
s5520sc not efi mode booting
efi optimized boot enable,
use Legacy bideo for efi os enable
not video output
I am upgrading an older system for graphics, Photoshop/Premiere.
Some RAM concerns; they are readily available as Dual Ranked 4x or 8x. But I can't find the motherboard limits on total ranks. ...Having trouble understanding some specs...
Am also told on other forums that although not listed as beyond DDR3 1333 capable, DDR3 1600 will work. 1600 are all that are readily available.
With twelve slots I would like to run twelve "DDR3 PC3-12800 • CL=11 • Dual Ranked • x8 based • Registered • ECC • DDR3-1600 • 1.35V • 1024Meg "
They are available as 8x or 4x, both Dual Ranked.
A bit more info: 'am still investigating all possibilities, but hope/intend to upgrade from DualE5620 2.4GHz Dual Quad processors up to 5690's.
From a nvidia FX1800 card to a GTX 980 Ti Hybrid graphics card.
And from a WD Veloci Raptor SATA HD to a 1Tb WD Blue Pc SSD
An obvious novice, any help, cautions, suggestions will be appreciated!
Thank you.
Hello dear users! Help me please to launch my S2600СP server.
I have this problem:
It was installed system Windows Server 2008 x64 R2. Very noisy coolers and I decided to update the BIOS to automatically adjust the noise coolers. I downloaded the update "S2600CP_SFUP_BIOS02060002_ME020107328_BMC0125r9398_FRUSDR111" and set them with the windows command line. Update was successful, but after I turned off the server and turn it on again, it is no longer loaded, again noisy cooler and there is no signal on the monitor.
I read the instructions, move the jumper to position 2-3 and would like to install the BIOS firmware from the flash drive, but I did not work, writes: BIOS INSTALLED: SE5C600.86B.02.03.0003
Platform ID: S2600CP
And flashing cursor to the bottom, no processes not.
I ask your help, please tell me what should I do?
Hi everyone,
I have above specification server. I am facing problem when installing Wmware Esxi5.5 or any lower version of Esxi. During installation Esxi detect no hard drive it show like this.
So Please guide me how can i fix this problem.
Thank
Hallo,
ich habe einen Server mt dem Board S2600CP auf dem bereits eine CPU installiert war.
Installierte CPU Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
Auf dem zweiten Sockel wurde eine weiter CPU Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz eingesetzt.
Im BIOS wird jedoch keine zweite CPU angezeigt. Auch zusätzlich eingetzter Speicher wird nicht angezeigt.
Wird die neue CPU auf Sockel 1 gesetzt wird diese auch im BIOS angezeigt nur der zweite Sockel gibt keinerlei Sockel ans BIOS zurück.
Sockel zwei ist mit Strom versorgt.
Kennt jemand dieses Problem? Kann mir jemand weiterhelfen?
Support Intel server board Sapello S5000VSA sata-hard drive capacity 1Tb?
Interested sata-hard drive:
1) Seagate Original SATA-III 1Tb ST1000NM0033 Constellation ES.3 (7200rpm) 128Mb 3.5"
2) Seagate Original SATA-III 1Tb ST1000NM0055 Enterprise Capacity (7200rpm) 128Mb 3.5"
Dear,
I'm busy configuring my N-Able enviroment to monitor my servers. Currently i'm running into an issue regarding SNMP and physical disk health.
I've configured the server with the software:
The server is running Windows Server 2012 R2 Standard x64.
I can monitor everything else just fine, the fans, temprature and the PSU's work. The only thing i cannot monitor are my Disks an RAID configuration.
I have installed and configured the SNMP service.
Am i calling on the wrong OID's? The OID's that are getting queried by my monitoring software are as follows:
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25
1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15
I have tried a manual request with these OID's and i got a No Such name error Which could mean i'm missing the required mib's
So i'm wondering, have i missed some software? Or is it because my OID's arent right?
Thanks in advance,
Ferdi
SAS Cable Kit AXXE3RACK8DCBL Especificaciones
I'd like to understand how many SATA to SAS can be connected