Hi,
I installed Windows Server 2012R2 on my S5520UR platform. But the windows hangs up when I attach an SSD disk.
I'm attaching logs from the sysinfo utility.
Do you have any tip to help me ?
Thanks
↧
Server S5520UR + Windows Server 2012R2 does not work with SSDSC2BA20 disks
↧
sc5300brp + Intel S5000PSL: green blink Status LED
Hello.
I have : sc5300brp + Intel S5000PSL and green blink Status LED.
Green blink Status LED: some cpu fault, dimm killed.
SEL logs:
Why status is blink green? What i can do for green on?
I attached sysinfo_log from sysinfo v1.2 for windows and raid log from web console 3
↧
↧
HDD 10Tb not recognized in server SR2612UR
I have server SR2612UR with 12 SAS/SATA slots. 12 hdd slots connected to RAID RS25AB080 using active midplane (SAS Active Midplane Brd TCA-00277-01-C)
I insert HDD HUH721010AL5204 (10Tb) and it not recognized. Other HDD's work well.
Where is the problem?
↧
Alert with RS2BL080 RAID Controller, drives online
I have a RS2BL080 RAID Controller installed. All Drives are online but he gives me an 1 second to 2-3 second pause alert. He gives me no Errors not even in the Event Log from the RAID Web Console 2. Somebody has an idea?.
Edit: Okay i find this in the Event Log, maybe this helps
↧
PCI Express graphics with Intel S2600CP2J
Hi everyone
Is the Intel S2600CP2J motherboard compatible with PCI Express graphics cards in a 2P server configuration?
↧
↧
S2600GL BMC issues
Hello, I have an Intel 1U Server with the S2600GL motherboard
I am unable to login via web management, login failed although I am sure that is the password.
Tried to ssh as well, I get
Failed to communicate with IPMI stack..
Discovery of Targets Failed......exiting
Initialization Of Smash Failed......Exiting
Connection to 192.168.77.19 closed.
Everything has been updated to latest firmware, management accessible via web and ssh. RMM4 key present
Is there a way to fully reset BMC to factory or erase all it's settings? Currently no joy with ipmitool cold reset...
Any advise please
↧
How to use (& configure) the on-chip 16GB cache of the Xeon Phi processor?
I have a Xeon Phi 7210 processor as a stand-alone CPU (not co-processor) in a CentOS system and want to use its in-cache memory.
I would like to know how to configure it (I found a PDF from intel about the various configurations you can have on your Xeon Phi)
and how to allocate memory on it (I already tried hbw_malloc() from the memkind package but it crashes the program).
The OS sees 2 NUMA nodes, one node with the whole RAM and 256 cores (the actual 64 CPU cores * 4-way HT) and the other node with
just 16 GB RAM which I guess is the on-chip RAM. Thus I don't think it's configured in cache mode and I should be able to malloc() it.
↧
Платформа Intel 1U R1304RPOSHBN. Не могу зайти в BIOS.
Платформа Intel 1U R1304RPOSHBN. Не могу зайти в BIOS. В инструкции сказано по функциональной клавише F2. При включении выводится сообщении о платформе, далее черный экран. Система перезагружается по сочетанию клавиш CTRL+ALT-+DELETE
↧
S2600CP2J: How to boot from USB?
Hi everyone, I am running an Intel S2600CP2J motherboard in a DP config, and I have two separate SSDs attached to SATA ports 0 and 1. I would like to set up a multi boot setup with macOS Sierra on one drive and Windows 10 x64 on the other.
But, I am struggling immensely with getting the motherboard to recognise the two USB thumb drives I've set up as boot disks. For the Windows USB I've set it up as:
- FAT32
- Master Boot Record
- Used macOS diskutil to set up a Windows 10 ISO on the drive.
For the macOS Sierra boot disk:
- Mac OS Extended Journal
- Apple GUID Partition Map
- Unibeast to set up EFI installer for macOS Sierra installer
- Added Multibeast to the drive
I'm not quite sure what the issue is, but I simply cannot boot from either USB disk, not as a boot option nor from the EFI Shell.
Any assistance would be highly appreciated.
Cheers
↧
↧
hola a todos, tengo problemas con la controladora SAS1064E retire 2 discos duros (estaban en raid 1) el S.O. me mostraba como una unidad D: pero y al colocarlos nuevamente el servidor windows 2008 server ya no se visualiza esta unidad y en el administrado
hola a todos, tengo problemas con la controladora SAS1064E retire 2 discos duros (estaban en raid 1) el S.O. me mostraba como una unidad D: pero y al colocarlos nuevamente en el servidor windows 2008 server ya no se visualiza esta unidad y en el administrador de discos si se puede ver pero pide activarlo, al hacerlo sale que no se encuentra el archivo. Si alguien me puede apoyar en la solucion
↧
Intel active system console 7 не запускается
Здравствуйте
Не могу зайти в active system console. UAC до установки отключил.
После установки открывается web страница с запросом имени и пароля. Ввожу логин и пароль, поля становятся серыми и на этом все. Через несколько минут опять форма становится активной.
ОС: Server 2012 R2
Платформа: R2308WTTYSR
Проблема наблюдается во всех браузерах. Система чистая, только установлены драйвера и обновления с windows update.
По советам с форумов установил компоненты ASP.NET и клиента SNMP. В свойствах системы папка C:\Program Files (x86)\Intel\ASC к переменной path добавлена.
Пока писал, в первый раз появилась ошибка «You are offline!! Please check your network.».
Как все таки зайти в эту консоль?
↧
S5520sc NO BOOT no beeps - dead!
Hello,
As this is my first despered post i must ask to forgive my language- it's not my mother's tongue.
MB S5520SC
1xe5620 xeon +
Intel Chassis +
32GB of RAM +
04 500GB Velociraptors RAID10
everything was fine until I reboot
After reboot,
there's no action . no fan spinning no boot screen no beeps- nothing except STATUS ID LED AMBER and 5V SB LED Green led
There's also this very quiet squeaky high sound coming form the MB - l
Anybody's got some idea how to fix this?
The 2x 8pinEPS plugs are pluged
Aux PWR 5pin power connector is connected
Well i beg for any ideas to check.
Please
REgards
I'm so despered...w to fix this?
↧
How to (re) enable http/https service for BMC web console (RMM4)
How can I enable http/https service on the RMM4 when it has been disbaled and the web console is not available anymore?
↧
↧
ram w2600cr2
Bonjour je ne parvient pas a ajouter mes 12 carte de ram sur ma carte mere w2600cr2 j'ai 12x4gb RAM en 1333
↧
Where can i find motherboard revision on my MB (SR1670HV S5500HV(A))
How can i know my MB revision for sure? What if i try to update BIOS if there is required revision 1.03g, and i don't know what is mine?
================================================================================
DATE : October 29, 2010
TO : Intel(R) Xeon(R) Processor-Based Server platform customers
SUBJECT : BIOS Release notes for version R0217
================================================================================
================================================================================
SYSTEM FIRMWARE REQUIREMENTS
================================================================================
BIOS Update Utility:
AFUDOS utility
Production boards:
Product Fab Version
S5500HV Rev 1.03G
================================================================================
↧
SR2625URLX Server
Hi,
My SR2625URLX server has a beep code 1-5-4-4 and will not POST. I have tried changing CPUs, RAM, and power supplies. From the other posts I have read, it seems the remaining fault is the PDB. Should look for any other faulty parts? I have ordered a PDB.
In trying with an ATX power supply, I was able to get to a video display so I think the PDB is at fault. Does this seem reasonable?
Tom
↧
Using Windows IoT, When I reboot computer, OS hangs, and front panel error LED turns red. Looking at the selview file, I find the above error. When I boot again, it does a windows repair, saying to reboot computer. Upon reboot, server boots into Windows I
Server chassis R1304JP40C S1600JP motherboard.
↧
↧
System Firmware Progress, POST Err Sensor (#0x6)
Using Windows IoT, When I reboot computer, OS hangs, and front panel error LED turns red. Looking at the selview file, I find the above error. When I boot again, it does a windows repair, saying to reboot computer. Upon reboot, server boots into Windows IoT.
↧
ss4000e firmware version as "lease"?
Something happen to my ss4000e 'cause I can't login the system, I can't map drive letter (it shows me the message "The specified network name is no longer available"), but I can ping it succesfully. In Storage System Console I saw in system information that the version of NAS is "lease" instead of firmware version (fs-bc - 1.4b710). Is there a way to reinstall the firmware again? or Maybe I need a new Storage System?
Please let me know what I can do ...
Thanks...
↧
Intel SS4200-e Power button flashing blue (Newbie)
Hi everyone,
Before I start, this is my first NAS system and first experience with them. Please bear with my ignorance.
So, I bought a used Intel SS4200-e because it sounded good. I wanted at least 4 bays for 8TB totals and set them up as RAID 1.
The previous owner upgraded it to a e4500 core2 dual processor from "original Celeron set-up" (I don't even know what that is or if it's relevant) and also upgraded the ram to 2GBs.
It apparently came with Freenas on a USB that he said must stay in port one. That's all it came with though. It didn't come with the original install disk, so I searched for what I think it is and downloaded it (Intel Entry Storage System en-1.1.11.32736).
I ran that but I get the error:
"Sorry. Please confirm that all cables have been properly connected, your router is working properly, and the Intel Entry Storage System device has been turned on before clicking Next again.
Click the Retry button to try again.
Click the Back button to start the install again."
I think this is because the power button is continuously flashing. I've left it on for an hour or more and it didn't stop. From what I've read, this could be because there is no operating system for the system to boot to (so, the USB is not set up correctly?).
I've tried resetting it as well but when the power button turned amber, it didn't flash, it just stayed solid and again, I left it on for an hour or more and it didn't change.
My questions are:
Should I format the USB and install WHS on it? Because from what I've read, it sounds like it'd be more user friendly for someone that is new to a NAS.
Do I have to change any setting with my router?
Do I need anything else installed on my PC?
I also use a VPN (PIA). Does that make any difference?
Thank you for any help you can offer.
↧