Quantcast
Channel: Intel Communities : All Content - Servers
Viewing all 3917 articles
Browse latest View live

can i upgrade my cpu?

$
0
0

Hello, I have 2 Dell dimension XPS running XP PRO. Now that XP is  being non supported and Microsoft is leaving it with a major problem with wuaucit.exe running in svchost  I want to install windows 8. However, win 8 does not support my cpu because it does not have the execute disable bit. My cpu is a pentium 4, 3.2 GHZ, 800 MHZ, 512 KB cache. I am looking for  new cpu and what do I do about the BIOS. i am also trying to find information about the mother board to see if I put a new cpu is it wire so that windows can access the bit. Everyone says I need to get new machines but these cost over $3,000 new plus the software. I also have a dell inspiron 8500. I thought a simple way to  get around the svchost problem was to go to win 7 but the problem is in seven as well so I changed my browser to safari.

 

any help will be greatly appreciated


Problemas con SELView en hp server rx2620 intel Itanium 2 Madison 9M

$
0
0

Hola,

Miproblemáticaesqueno mepermiteentraralSELView,porEFIShell,niporelejecutabledel Windows,tengoel equipoalarmadodesdehacevariosdíasyaintenteconvariasversiones, pero nada, cuando instalo el imbdrv falla por “SetupDiCallClassInstaller failed.”y en el Device Manager -> System devices el driver me lo muestra alarmado con el estatus “This device cannot start”.No séquememashacer.

 

Datosdel  equipo:

CPU -> IntelItanium2, 1600MHz Madison 9M - A2

Motherboard -> hp server rx2620

O.S. -> Windows Server 2008 R2 for Itanium-Based System Enterprise (IA-64)

 

Nota:

El servidor antes tenía el O.S.  HP-UX

 

De antemano agradezco cualquier ayuda que me puedan brindar.

Saludos!

Anexoel error deselview.exe

error-SELViewer.PNG

S1200V3RMP / XEON E3 1275V3 HDMI audio problem

$
0
0

Hi all,

I have an Intel S1200V3RPM server board, XEON E3 1275V3 processor (P4600 graphics), which I use as an audio and video streamer.

The only drivers I have been able to install are the 10.18.10.3316 from windows update. All other drivers from the Intel download center (.3316 and .3345) fail to install.

The problem I experience is that I do not have any audio on the HDMI input of my AV receiver. I connect my board via DisplayPort cable -> HP BB937AA adapter -> HDMI cable-> Onkyo PR-SC5507 AV receiver. My PC cannot see the Onkyo as an audio device. Video gets transferred fine.

 

The HP Displayport - HDMI adapter works fine connecting an HP Elitebook 8570w to the Onkyo, miltichannel HD sound and all.

Thanks for any help, as the video part of my streamer is unusable like this.

RudiV

S1200V3RPS RST Utility

$
0
0

I have been using the S1200 series of boards for a while now and am building three servers with the V3RPS board.  In the past I would install the Intel RST utility in Windows to allow me to configure the hotspare on the system.  Now however I cannot install it and cannot find an Intel utility to allow me to do this, can someone point me in the right direction?

Three RS2BL080 Controllers on same server and one large VD

$
0
0

I need to assemble a large RAID 6 volume, with 24x 4TB, considering 2 of them as hot spares. It's being very hard to find expanders/backplanes here around, but I can afford to have three RS2BL080. Would they work together to allow a single large VD?

RAID simulator for Intel Rapid Storage Technology enterprise error

$
0
0

I just downloaded the RAID simulator for Intel® Rapid Storage Technology enterprise from the Download Center and installed it on Windows 7 x64 SP1. When I launch it using Run As Administrator (plus I have UAC disabled), I get the following error:

 

ERROR - "the 'microsoft.ace.oledb.12.0' provider is not registered on the local machine"


If I hit cancel, I get a Microsoft .NET framework error. the details of this are below:


See the end of this message for details on invoking

just-in-time (JIT) debugging instead of this dialog box.

 

************** Exception Text **************

System.NullReferenceException: Object reference not set to an instance of an object.

   at RAID_Test1.CTRL_I.ViewItem()

   at RAID_Test1.CTRL_I.CTRL_I_Load(Object sender, EventArgs e)

   at System.Windows.Forms.Form.OnLoad(EventArgs e)

   at System.Windows.Forms.Form.OnCreateControl()

   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)

   at System.Windows.Forms.Control.CreateControl()

   at System.Windows.Forms.Control.WmShowWindow(Message& m)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)

   at System.Windows.Forms.Form.WmShowWindow(Message& m)

   at System.Windows.Forms.Form.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

 

 

************** Loaded Assemblies **************

mscorlib

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)

    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll

----------------------------------------

Intel RAID Simulator

    Assembly Version: 1.0.0.0

    Win32 Version: 1.0.0.0

    CodeBase: file:///C:/Users/LM/Downloads/Intel%20RAID%20Simulator%20rev2.0/Intel%20RAID%20Simulator%20rev2.0/Intel%20RAID%20Simulator.exe

----------------------------------------

Microsoft.VisualBasic

    Assembly Version: 10.0.0.0

    Win32 Version: 10.0.30319.1 built by: RTMRel

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll

----------------------------------------

System

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1001 built by: RTMGDR

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll

----------------------------------------

System.Core

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.233 built by: RTMGDR

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll

----------------------------------------

System.Windows.Forms

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1002 built by: RTMGDR

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

----------------------------------------

System.Drawing

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1001 built by: RTMGDR

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

----------------------------------------

System.Runtime.Remoting

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll

----------------------------------------

System.Data

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.237 (RTMGDR.030319-2300)

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll

----------------------------------------

System.Xml

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1015 built by: RTMGDR

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll

----------------------------------------

System.Transactions

    Assembly Version: 4.0.0.0

    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)

    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll

----------------------------------------

 

************** JIT Debugging **************

To enable just-in-time (JIT) debugging, the .config file for this

 

I searched online for a resolution to this but they all related to Microsoft Access 2007 and I am using Office 2013 Pro Plus, so it didn't apply. Any ideas how to fix this?

 

Lyle Epstein

Update BIOS on SRCS16 RAID Controller

$
0
0

I'm trying to use an SRCS16 RAID controller in a system with a S7320SP motherboard.

Whenever I try to power up the system with the SRCS16 installed I get a 'Parity Error', and can't get to the BIOS configuration.

I have come across an article saying that there may be a BIOS version issue happening.

http://www.intel.com/support/motherboards/server/sb/CS-016622.htm

 

The S7320SP now has the latest (11.x ) BIOS

 

This article says that I need to update the BIOS on the SRCS16 by disabling the on-board NIC on the motherboard.

However no matter what I do, I am unable to get the system to start with the SRCS16 installed.

 

I've also tried installing the SRCS16 in at least one other system (a HP DL380 G4), temporarily just to update the BIOS, but this also conflicts (probably with the onboard SCSI Controller).

 

I'm struggling to find a system with either a 32 bit or 64 bit 3.3v PCI slot.

 

I'm unsure the current BIOS in the SRCS16.

 

I have a number of versions of the BIOS for the SRCS16 ( up to ver 713S )

 

Any help would be appreciated

MFSYS25 Switch module problem

$
0
0

Hi,

I have network problem with my Intel MFSYS22 (Current Build Version: 6.10.100.20120307.34729) Switch module.

Product NameGigabit Ethernet Switch
ManufacturerIntel Corporation
Manufacture Date2008-02-03 10:40:26 PM
Part NumberD70739-404
Serial NumberBZTC80500085
Asset Tag
Up Time0 days 0:46:35
Product IDINTEL_SM
HW VersionD70739-404
Boot Version1.0.0.6
SW Version1.0.0.27

 

Once or twice a day it loses network connectivity on external and internal ports. It's status becomes "Unmanageable" until I remove it from chassis and put it back.

This issue start about month ago, but for first time it loses network connectivity once at 10 days. Now it loses twice times for a day.

How can I resolve this issue?


S2600CP4 + WD RE SAS + SATA to SFF-8482 cable

$
0
0

Dear community,

I just bought

- Intel S2600CP4 server board

- 4 x WD1001FYYG (SAS 1TB disk)

- 4 x SATA to SFF-8482 cable ( here is how it looks like http://imgur.com/fuHYuP1  , http://imgur.com/1AtFt86 )

 

Hard drives are attached to SAS0 - SAS3 on the motherboard

 

The hard drives are not visible in bios, i want to use this disks (with RAID or withiout, doesnt matter at this point)

 

What should i do to be able to use this discs ?

 

Regards

Maciej

R2312GL4GS & RES2CV240 & RMSCB040

$
0
0

Hello,

 

Is it possible to use an RMSCB040 RAID6 module in conjunction with a SAS expander (either RES2CV240 or RES2SV240) to run up to 12 drives in a R2312GL4GS server system.

 

Will a RES2CV240 physically fit in a R2312GL4GS, is there a molex connector to power it and crucially is it a supported configuration.

 

I know a RS2WG160 controller will work but I'm looking for a less expensive solution.

 

Regards,

 

GT

RES2CV240 & ESRT2 & RSTe

$
0
0

Hello,

 

Does ESRT2 work with RES2CV240 and if so is SATA/SAS RAID5 supported if the appropriate RAID key is used

 

Also does RSTe work with RES2CV240 and if so is SATA RAID5 supoorted if the appropriate RAID key is used.

 

Regards,

 

GT

RSTe & VMware

$
0
0

Hello,

 

I have read on the VMware website that ESXi 5.x supports RSTe on the SATA/SAS capable C600 chipset and have a few questions...

 

  1. Is an add in driver required or will it install with the downloadable ESXi install DVD.
  2. How do you manage arrays inside VMware
  3. Does it only work on 1400/1600/2400/2600 series boards or will it work on S1200V3RPS/L which also use RSTe ?

 

Apologies a newbie to VMware.

 

Regards,

 

GT

S3210/S3200SH strange behaviour

$
0
0

I recently got an old S3200/S3210 Board and it behaves kind of strange. Sometimes on start it beeps one time, then 2 times, also sometimes 3 times. Manual is just saying if it beeps 3 times, then memory error. What about the other beeps?

 

I ran memtest86+ few times, the first time i run it i saw like 10k errors and was running only 1 time. Then after memory module reseat i ran it a whole day with few pases and no single error.

 

Rarely it stops before booting with 2x LEDs lighting up. Unfortunately i am not sure if one of them is orange or red. If i am not mistaken its something about PCI Bus (there is no card installed).

 

Is there a problem with the board or memory? ECC is enabled in BIOS and it is also ECC unbuff. memory.

 

There is not a single error logged in the bios!

Supported RAM-Modules (Memory) needed for Intel Server Board SE7320VPD2

$
0
0

Hi!

 

I am seeking for information, which RAM modules are needed for the SE7320VPD2. Again I have a SE7320VPD2-Board, not a SE7320VP2 nor a SE7320VP2D2. I already found infos for SE7320VP2 and bought some memory, which is suitable for it, but it does not work in my board.

 

Thanks in advance.

can i upgrade my cpu?

$
0
0

Hello, I have 2 Dell dimension XPS running XP PRO. Now that XP is  being non supported and Microsoft is leaving it with a major problem with wuaucit.exe running in svchost  I want to install windows 8. However, win 8 does not support my cpu because it does not have the execute disable bit. My cpu is a pentium 4, 3.2 GHZ, 800 MHZ, 512 KB cache. I am looking for  new cpu and what do I do about the BIOS. i am also trying to find information about the mother board to see if I put a new cpu is it wire so that windows can access the bit. Everyone says I need to get new machines but these cost over $3,000 new plus the software. I also have a dell inspiron 8500. I thought a simple way to  get around the svchost problem was to go to win 7 but the problem is in seven as well so I changed my browser to safari.

 

any help will be greatly appreciated


Problemas con SELView en hp server rx2620 intel Itanium 2 Madison 9M

$
0
0

Hola,

Miproblemáticaesqueno mepermiteentraralSELView,porEFIShell,niporelejecutabledel Windows,tengoel equipoalarmadodesdehacevariosdíasyaintenteconvariasversiones, pero nada, cuando instalo el imbdrv falla por “SetupDiCallClassInstaller failed.”y en el Device Manager -> System devices el driver me lo muestra alarmado con el estatus “This device cannot start”.No séquememashacer.

 

Datosdel  equipo:

CPU -> IntelItanium2, 1600MHz Madison 9M - A2

Motherboard -> hp server rx2620

O.S. -> Windows Server 2008 R2 for Itanium-Based System Enterprise (IA-64)

 

Nota:

El servidor antes tenía el O.S.  HP-UX

 

De antemano agradezco cualquier ayuda que me puedan brindar.

Saludos!

Anexoel error deselview.exe

error-SELViewer.PNG

bois crashes problem

$
0
0


This has happened 3 times where in the middle of the night the PC shuts itself off and then won't restart. The only way I can get it up and running again is to flash the bios with a flash drive. This is a S1200BT server board running Windows 8.1 It's like the bios is erased for some unknown reason.

One time after it quit the bios would come up with a screen that said it needed help but with no options to fix it so I would have to reinstall the bmc and bios any ideas?

Raid Web Console 2 No servers were found in this host

$
0
0

Hello All,

 

Intel SR1560SF Server setup with hardware RAID1 / 2 disk with fresh install of CentOS 6.5  - 64 bit.

Ver 13.08.04.01 of Intel Raid Web Console 2.

 

I have worked on this for two days now,and Still when opening the IRWC 2 console after searching very briefly " No server was found in this host"

The Console does display the correct machine ip address in the console when searching.

Have used RedHat/CentOS for about 10 years now,So very familar with file locations,and depedency installing etc.
I have read the Raid Web Console  README.txt file many times,,and installed all the extra .i686 rpms as required.


Have read were on older versions of IRWC it would only use the highest nic,,if the board had two active nics. this is not the case on mine,,I have disabled,,re-enabled nic 1 and Nic 2.

 

I have never seen a good rundown,on what ports at a  minimum need to be listening/running for example when I run  netstat -tlnp ?

I was fairly certain this would be a challenge with the having to add i686 rpm's to an x86_64 system,but thought I would have had it going at this point.

Is it mandatory to have the Intel specific hard drive sas drivers,,for the the right hooks for the Web Console?
This CentOS  install installed the native CentOS mpt2sas driver which is actually what Intel driver bundle installs?

 

Thank You,
Barry

Server 2012 R2 efi installation

$
0
0

Hi,

 

I am currently trying to install windows 2012 R2 on an Intel S5520HC with a RS2BL080 Raid controller. I have 6 x 2TB drives configured in RAID 10 and due to the size of the array I have to use EFI to install windows on a GPT style partition table. The issue I have is that the installation fails at copying windows files during installation process. I have tried enabling EFI optimised boot and use Legacy Video as per GPT White paper found on Intel website, this causes the installation to hang at 0% during 'copying windows files' phase. If I disable optimised boot and use EFI shell to start installation I get a windows blue screen at the 'copying windows files' phase. I can install 2012 R2 with MBR partition but lose the remainder of my array.

 

I have updated firmware of mainboard and raid controller and still no joy, I also found a compatibility list for mainboard and server 2012 is there but no idea if 2012 R2 would be different though I tried installing 2012 STD and it fails same place.

Any help would be much appreciated.s

 

Thanks

problems with modular server

$
0
0

Hello,

 

a customer of us is running a modular server for over 2 years now. There was never a single problem. But from november of 2013 there is an component error.He says server 1 and server 2 are unfit.I compiled a diagout.htm but thats password protected. what to do?

 

with regards,

 

Sebastian Slots

Viewing all 3917 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>