GPU cables
Hi, I am looking for GPU cable similar to G25087-001 but with two 8 pin connectors. P2 and P3 should be 8 pins.Some GPU boards required power from two 8 pin connectors. Total of 3 or 4 GPUs in the...
View ArticleHow to update MFSYS25V2 to 10.18 firmware
Hello,I have an Intel Modular Server System MFSYS25V2 with fw Version 11.6.100.20120307.34736.I currently have two problems: 1) The CMM reboots about every 90-120 minutes. I see sequence of these...
View ArticleClik here to view.
P4304XXSHCN with S1200V3RPL chassis fan speed
Does anyone have any information about thermal management of the following combination.New P4304XXSHCN chassis with S1200V3RPL board and E3-1241v3 cpu with stock cooler.Firmware updated to...
View ArticleIntel R1304BTL BMC access via portforwarding and NAT
Hello, I have a Intel R1304BTL server in my datacenter, and I need to access the BMC over internet, and I would like to do so by using port forwarding to the private ip number of the RMM module on the...
View ArticleWhat is the Default password for Diagnostic Logs of MFSYS25?
Can anybody Tell me the Default password of the zip file captured from Diagnostic Reports option from MFSYS25 Web console?
View ArticleClik here to view.
s2400sc driver AHCI windows 2003
I need ti install windows server 2003 on S2400SC with two HD in raid mode, but during install I can't see the HD. I need driver AHCI for floppy (I think) where can i find it?
View ArticleIntel Active System Console on Ubuntu
How can I run Active System Console on Ubuntu 14.10 (x86-64)?
View ArticleIntel® Desktop Board DZ77SL-50K PCI & PCI E Use Same IRQ
Hi, I have purchased "Intel® Desktop Board DZ77SL-50K" on which i have connected One PCI Openvox 8 Port Analog Card and one PCI-E Openvox 8 Port Analog Card on my Asterisk Elastix Version # 1.8 Lunix...
View ArticleCATERR problem with S2600GZ
I'm having a problem booting up my S2600GZ machine. When I plug the power, it starts on its own, and keeps rebooting. Even the BMC console is not functioning. I tried upgrading the firmware, using the...
View ArticleClik here to view.
Old server, 3 Tb drives.
Hello. I have an old Intel server system with FSR2520BPSAS 6-drive active SAS expander backplane. The server uses integrated motherboard SAS RAID controller which does not support >2Tb HDDs. I,...
View ArticleRAID0 with the Operating system W2012R2 on breaked apart.
My RAID0 with the Operating system W2012R2 on breaked apart. Intel Storage Utility shows status "Rebuild" and it will be rebuild whithin operating system, but I can't starst the operating system. Pls,...
View ArticleIntel S1200V3RPS ACPI Fail after Firmware Update
So, after firmware update, from 01.04.0002 to 02.01.0002, Windows 2003 doesn't boot with the stop 0x00000A5 Update is gone ok. Had i do something wrong with FRU/SDR? Many Thanks, Antonio D'Affuso
View ArticleClik here to view.
Create a TEAM for LAN adapter
I'm here again.My MB S2400SC has two LAN port (82574l) Is it possible to create a team between this adapter?
View ArticleClik here to view.
RMS25CB080 performance
Hi ! We have server R2208ip4lhpc (fw 02.03.0003) with RMS25CB080 (fw 23.29.0-0016), AXXRMFBU2 (fw 0016).Drives 5x HGST HUC109060CSS600 (600gb Enterprise SAS 10k 6gbit/s) configured as two RAID1 sets...
View ArticleClik here to view.
S5520SC Board will not accept over 8GB memory. What to do?
My S5520SC Intel Board will not accept over 8GB memory. What to do. Running XP 64 bit. Also forum does not apperar to have an English Language option. ThanksBob AZ
View ArticleP4308XXMHDR, 8 posible disk, but cable for only 4
Hello all This is my first post. I'm stuck on this. We are building a server with a P4308XXMHDR chasis with a S2600CP2 motherboard.Chasis come with space and 8 hot-swap hard disk carriers. Motherboard...
View ArticleLAN port in Team and Switch
I've due lan port in team (Adaptive Load Balancing). My question is: the port on switch must have trunk enabled?
View Articlemodule does not start automatically
Hello.I have five MFS5520VI Compute Module (BMC Firmware ok 1.27.1, BMC Boot ok 0.28, BIOS ok S5500.86B.01.00.0060.092120111445)I set the value "Reset" in the "Resume on AC Power Loss" option.After...
View ArticleIntel S2600GZ Server SSD Issue
I have Intel S2600GZ server with 1 SSD (on which OS will be installed), 2 SAS hardisks & RS2WC040 RAID controller, I have to created RAID 1 on SAS. but it's not detecting SSD on which I have to...
View ArticleClik here to view.
S1200BTLRM: Status LED blinking amber
I just installed my second new S1200BTLRM motherboard. I am interested to find out what is the reason for blinking amber status led. No other led are on/off/blinking. I didn't have this kind of result...
View Article