Does anyone have any information about thermal management of the following combination.
New P4304XXSHCN chassis with S1200V3RPL board and E3-1241v3 cpu with stock cooler.
Firmware updated to 02.02.0005
Machine power cycled.
The following issues are being experienced
- Chassis fan speed/ noise about twice that of comparable HP or DELL machines
- At a chassis fan speed of about 4400 RPM and above the air flow through the power supply is first stalled then reversed!
- Aggregate Thermal Margin 1 reports values above what is reported to be CT (0 degrees C)
The following table list thermal information from the web console, Front Panel Temp = ambient temp
| Front Panel Temp | 25 | 26 | 28 | 30 | 32 | 33 | 36 |
| PCH Temp | 43 | 46 | 48 | 52 | 53 | 54 | 52 |
| Sys Fan | 2040 | 2382 | 2760 | 3528 | 3744 | 4008 | 4416 |
| CPU fan | 936 | 948 | 936 | 936 | 936 | 996 | 948 |
| P1 Therm Margin | -69 | -67 | -46 | -28 | -23 | -23 | -59 |
| DIMM Therm Margin 1 | -57 | -56 | -55 | -44 | -41 | -41 | -48 |
| BB EDGE Temp | 27 | 29 | 29 | 33 | 36 | 36 | 36 |
| BB BMC Temp | 31 | 32 | 34 | 37 | 39 | 40 | 40 |
| BB CPU VR Temp | 30 | 31 | 32 | 32 | 49 | 48 | 39 |
| HSBP Temp | 28 | 28 | 30 | 32 | 35 | 36 | 38 |
| Agg Thrm Mgn 1 | 1 | 2 | 4 | 7 | 9 | 10 | 10 |
Any information great fully accepted