S2600CP motherboard swap how to transfer RAID1
Hello from Brussels,We will switch from a failed S2600CP to a new S2600CP that will (hopefully) be received this Monday.Is it a procedure to transfer the RAID1 containers without loosing all the data...
View ArticleClik here to view.
S5520HC Memory
I have a S5520HC system with dual E5520 Xeons and I want to upgrade the memory to 64GB. I have 8x 8GB RAM sticks, will they work in that configuration?
View ArticleClik here to view.
"PCIe Cor Sensor" error on S2600CP2J
Hello, I have a problem in my S2600CP2J board, firstly I installed a GPU (MSI GTX 760 OC) on the x8 blue PCIe slot the second one after the x16 slot, when monitor connected with the new GPU, the screen...
View ArticleClik here to view.
Server R2308WTTYSR + RAID-card, remove cable HSBP I2C from MB?
Hi!RAID-controller (9271-8i) connected to a backplane using two cables "SFF-8087 to SFF-8643". Should I remove HSBP I2C cable from MB to backplane??? As I understand it, this cable is only for the...
View ArticleSRCSATAWB 4 beeps
Hi.I have a SRCSATAWB on S5000VSA. After shutdown, and powering on controller (SRCSATAWB) didn't initialize, not in bios (loading process), not in windows.It immediately, after powering on, beeping and...
View ArticleClik here to view.
Firmware update to SAS drives connected to RS2BL040
How do I update SAS drive firmware when the drives are attached to a RS2BL040? I don't see this capability in RWC2 or the RAID BIOS. I have 4 Seagate drives, but one is down 1 firmware revision...
View ArticleClik here to view.
S1200SPL can't connect to COM (RS-232) device (APC Smart-UPS SC620VA).
Serial port is enabled in BIOS.The same device with the same cable successfully connected to another motherboad (asus z97-a), so device problem is excluded. Tried Win2012,Win2008R2,Win8.1Should I...
View ArticleDoes Server board S1200V3RP have the driver (especially for embedded raid) to...
I have a server system (S1200V3RP with E3-1200V3), I try to install windows server 2016 to upgrade the server, but can't find the driver for embedded raid driver, so I can go on for further installation.
View ArticleClik here to view.
motherboard s1200rp for p4600 procesor graphics support
HI there , a year ago i brought s1200rp motherboard for e3 1246 v3 processor which has processor graphics (p4600). but, motherboard i brought does not support it. [1]--- i need to know which...
View ArticleNo access RAID options on boot (Intel RSTe)
Hi,I have a problem with a S2600gz server.I can't access RAID options on boot. I don't see key combination to make. I follow this article : Not Prompted to Enter the Intel® RAID BIOS Console During...
View ArticleClik here to view.
Extract 1 processor from 2 processors system
Good day. I have a server R1304GZ4GC with 2 processors. If i want to extract one of them what will i have to do except extraction, of course. After i'd done this coolers started to fan with maximum...
View ArticleBarebone Intel R2208WTTYC1R FANS PROBLEM WORKFLOW
Hi I have a problem with Barebone Intel R2208WTTYC1R I don't know what I doing for have to control of the FANS. When the SO (Windows, Xen, CentOS...) is installed, the FANs have a null workflow ,...
View ArticleIntel S5000PSL CPU Fault
Gang Im after some advice, ive recently purchased an Intel S5000 board. I know this is out of support and nearly 10 year old tech, however this is for a project NAS, where I intend to use Nexenta and...
View Article2600CO motherboard shuts down after 10 sec start
If someone could help with this issueSystem was working perfect for a year without any changes.Then after I carefully transported it to another place it shuts down in around 10 sec after start.And the...
View ArticleLIthium ion battery on AXXRSBBU8
If the onboard battery of the AXXRSBBU8 BBU is old and depleted, can it be replaced with just a new battery, or does the entire AXXRSBBU8 need to be purchased again? If the answer is yes to just...
View ArticlePCI Express graphics with Intel S2600CP2J
Hi everyone Is the Intel S2600CP2J motherboard compatible with PCI Express graphics cards in a 2P server configuration?
View ArticleSAS IOC Temp has failed and may not be providing a valid reading
Hello, Just took delivery of a new Intel server, installed the SEL software to monitor events, and had several events that are a bit of a concern. Board is a S2600CW (version H67035-224), 32GB RAM,...
View ArticleCRITICAL EVENT: Pwr Unit Status reports the power unit has suffered a...
Hello, This is for a brand-new S2600CW board, single power supply. Green light is blinking, and the SEL has reported the following: "CRITICAL EVENT: Pwr Unit Status reports the power unit has suffered...
View ArticleClik here to view.
Alert with RS2BL080 RAID Controller, drives online
I have a RS2BL080 RAID Controller installed. All Drives are online but he gives me an 1 second to 2-3 second pause alert. He gives me no Errors not even in the Event Log from the RAID Web Console 2....
View ArticlePlaca Intel Server Board S1200BT
Prezados bom dia, possuo uma placa intel server Board S1200BT. A mesma apresenta ao ligar, um som contínuo de 5 Bips bem altos. E em determinados momentos me deparo com o windows congelando sem...
View Article