Clik here to view.
S2600CW Server Board Bios R01.01.0009 UEFI Secure Boot Question
Hi folks: I was going to upgrade my S2600CWTS board to Bios R01.01.00009 which was release a few weeks ago, but in the section marked "IMPORTANT NOTICE" point #5 says this: 5. BIOS R01.01.0009 will...
View ArticleUnable to expand existing RAID 5
Unable to expand existing RAID 5consisting of 3x930GB drives with 4th 930GB drive but evertime I try to add to Drive Group 0 a Drive Group 1 is created instead. The Controller I am using is a RS2BL080...
View ArticleS3000AH won't boot after BIOS update
I upgraded a S3000AH motherboard from BIOS v46 to latest v54. The update appeared to be successful and prompted me to power cycle to complete. I did, but now the board won't boot. No video activity...
View ArticleClik here to view.
Does C222 chipset with RSTe support GPT partitions?
I am working with supermicro board X10SLL-F, which has a C222 chipset. I've spent all day trying to get it to recognize two 4TB drives in a RAID-1 configuration and was not successful....
View ArticleRS3DC080 new RAID card doesn't see detect any connected SATA SSD drive
RS3DC080 new RAID card doesn't see detect any connected SATA SSD drive Any idea? Thanks
View ArticleClik here to view.
Invalid DIMM population error on S2600CP server board
As I purchased this board secondhand, I'm not sure if this is an S2600CP2 or S2600CP4. There is a sticker that reads: PBA E99552-507 QSCP22002137 I have dual Xeon E5-2630L v2 CPUs, and I have 4 x 8GB...
View ArticleCan't see Intel x710 FCoE device after ProSET installation
We recently purchased an Intel X710-DA2 Converged Network Adapter to provide both 10G network and FCoE connectivity to Cisco Nexus 5000 switches. This is installed in an Intel Server System S2600GZ...
View ArticleClik here to view.
My old server SC5300LX+SE7520BD2 won't boot after removing a second PSU
Hello, I have a intel server SC5300LX+SE7520BD2 with 1+1 redundant PSU (Delta electronics C46098-005). As one of the PSU had a amber led lighting, I decide to check the part-number and I did this by,...
View ArticleClik here to view.
Intel SNMP sub agent/mib setup and reading of values.
Hi All, Has anyone done up a guide on how to actually setup everything to start reading values into a network monitoring software such as prtg? I have installed the Intel SNMP subagent on the machine...
View ArticleClik here to view.
S2600CP4 DDR3 channel training error
Earlier, I reported an invalid DIMM population error with my S2600CP4 server board here. Now that I have the REG ECC DIMMS on-hand, I'm having a different issue. I'm now getting the following errors: 3...
View ArticleS2600GZ Despair....
Hello, I did a rather optimistic thing and bought the above mentioned server board off ebay, thinking I might be able to get it working. It hasn't really worked out. I gave it to an IT repair company,...
View ArticleS2600CP4 dual 2620 issue
Hi guys!The board works fine with one cpu installed(e5-2620),but when i install the second one,the system fails to post and falls into a never ending reboot cycle.Diagnostic LEDs are showing...
View ArticleE-mail notifications in RAID Web Console 2
Hello, few months ago I bought the Intel SRCSATAWB RAID controller which has been working fine so far (except one of the breakout cables which was damaged upon arrival). I have set up everything to my...
View ArticleS1200BTL LED CODES
Hi,I have a non booting s1200btl which stops in boot process with no display and following LED Status ID Blue LED = off STATUS LED= Green then after about 1 minute flashing amberLEDS: MSB...
View ArticleRaid Web Console 2
I'm having issues Sending SMTP Mail thorugh the Raid Web Console. I been using the Raid Web Console and Intel RAID Card for years, but it always seems like it's hit or miss with the console. Sometimes...
View Article1-wire temperature sensor
Hello, I'm working with Intel Server Board S1200RPM. I want to add a temperature sensor (Dallas DS18S20) to the front panel SSI connector. It appears in the specs (in the 24-pin EEB SSI connector...
View ArticleGetting "Flash downloaded image corrupt" trying to upgrade a RS2BL040 RAID...
Getting "Flash downloaded image corrupt" trying to upgrade a RS2BL040 RAID controller with current firmware 2.003-0673 from packet 12.0.1-057 July 25 2009. I have downloaded versions...
View ArticleW2600CR2 / C602
I cannot seem to get 2 Radeon 290X video cards to link up in the primary and secondary x16 slots ( Bottom and next one up ). They both are recognized and display separately however they will not form a...
View ArticleIntel P4308CP4MHGC graphics card w/ 6-pin power
Hi, what is the proper way of attaching and using a graphics card on P4308CPMHGC if the card has a 6-pin power connector?There's only a single 4-pin cord available out-of-the box, and also 4 other...
View ArticleClik here to view.
Raid config for S2600CW2 Server Board with FUP8X25S3HSDK 8x2.5 Hot Swap Drive...
I'm trying to install the S2600CW2 board in the P4304XXMFEN2 Server Chassis, using the 8x2.5 Hot Swap Drive Cage Kit FUP8x25S3HSDK, and the AXXCBL380HDHD mini-SAS cable(s).Problem is the embedded Raid...
View Article