Clik here to view.
RMM 3 command line status check
I've got a few devices that have RMM loaded. I know it's an intel rmm and pretty sure it's RMM3. What I don't know is what is the IP of the device and how to get it from just the command line. I can...
View ArticleS1200V3RPL: "bmclibinitialized returned failed" after BMC update to 01.12.7499
I updated an S1200V3RPL board to the latest BMC release 1.12.7499 via UEFI using the software provided by this link: Intel® Download Center [1] After the update, I wanted to change the SDR. Because...
View ArticleTeaming NIC PRO 1000/MT in windows Server 2008 R2
The Intel PRO 1000/MT has (today ?) no "full support" in Windows Server 2008 R2 ; that is : each NIC est recognized by OS and functionnal, but we can't built a team, because Intel Advanced Network...
View ArticleClik here to view.
Possible to Turn Off Server Beeping?
I posted early about the USB error with Intel S3420GP board. The beeping is very loud. It also beeps with many other events, a lot of them (like the false USB device error) are not even critical.
View Articlemotherboard se7230nh1-r and hard disk over 2TB
Hi everybody! Anybody know is se7230nh1-e mb support hard disk over 2Tb? I want to use 4Tb drives, but not sure that mb detect its.
View Articler1000rpo cannot install chipset driver
Trying to install chipset driver on Hyper-v Server 2012 r2, error says system does not meet minimum requirements, 16GB of Ram, and a 3.3Ghz E3 processor. The last time I did one it worked fine from...
View ArticleS5000PSL no longer booting
Hi Please can someone help I have a Server which has been working for about three running a S5000psl board for years with no problems. Recently 2 of the drive no longer being used were removed from...
View ArticleVDs on S1200BTL & Windows 7
Hello, My end goal is this: Set up RAID 10 on 4 HDDs with Windows 7 Pro. This is similar to this post, but I'm having trouble implementing the answer. Here is the situation: System:...
View ArticleIntel SS4200-E - 4 drives failed after power outage - help me get my data back
I've got an Intel easynas 4200-E with 4 1.5TB disks in it in a RAID5. Today we had a power outage, but the NAS stayed on during the brief outage, as it was connected to a UPS. When I came and...
View ArticleRaid 10 with 2 failed drives
I just like know if it is possible for raid 10 with 4 drives to boot up if 2 out of 4 drives fails?
View ArticleIntel Active System Console and Windows Server 2008 R2 Hyper-V Core
Dear Intel Community, We've taken on a new client that has existing Intel Hardware, which has Windows Server 2008 R2 Hyper-V Core Edition installed. I would like to get Intel Active System Console...
View ArticleClik here to view.
intel RST raid 1 preserve data greyed out
Hello, at the moment i'm bit frustrated, my situation looks like this: 1. i had intel RST raid 1 (seagate 1TB constelletion x 2 ) setup (in bios set Raid and intel RST), raid 1 was working, but both...
View ArticleServer Board S3420GP RAM Configuration
Hello, I have a problem with my S3420GP Board by using M393B5170DZ1-CF8 RAM Modules. After Installing one or two RAM Modules I get 3 beeps, which indicates an incorrect RAM Configuration. By reading...
View ArticleSR1560SF and ESXi 5.5
Hello everyone, I've been searching the web to no avail, I wanted to know if anyone is running ESXi 5.5 on this server. I have the opportunity to purchase some of these at a very reasonable price....
View ArticleClik here to view.
RS2WC080 on DQ67SW
Hello everyone, I have an Intel DQ67SW motherboard and an RS2WC080 raid card. I have not used the raid card in over a year (it was properly stored back in it's original box/packaging. and was working...
View ArticleS2600CO4 with (2) E5-2643 not reporting processor thermal margin
I have two S2600CO4 boards and neither of them reports processor thermal margin sensors. P1 Therm Margin | na | degrees C | na| na | na | na | na | na | na P2 Therm Margin | na...
View ArticleFault resilient boot
What does the FBR feature in Intel server board do ? What is the use ?
View ArticleBlinking Amber indication in front panel of JFQJR Server , what does it...
Blinking Amber indication in front panel of JFQJR Server , what does it indicate? I've checked bios for memory error but it is fine , there is no error in event log.
View ArticleIntel rmm3 problem
Hi. I have Intel rmm3 installed on one of my servers Smash CLP Version :SMASH 1.0.0/CLP 1.09 Somehow web is not working (page loading), but i do have ssh access. Is it possible to reboot server from...
View ArticleS2600GZ undocumented LED diagnostic code?
We have four identical servers based on the S2600GZ board, three of which are running with the POST Code Diagnostic LEDs lit in the combination 1101(amber)0100(green), while the fourth one has all of...
View Article