MFSYS25 Switch module problem
Hi,I have network problem with my Intel MFSYS22 (Current Build Version: 6.10.100.20120307.34729) Switch module.Product NameGigabit Ethernet SwitchManufacturerIntel CorporationManufacture Date2008-02-03...
View ArticleRMM4 Lite only 100Mbit/s?
Hi,I have a S1200BTL + RMM 4 Lite running ESXi 5.5 (Free). As I plug in the RMM4 Lite module, the 82574L NIC (NIC 1) is doing only 100Mbit/s (OS). When I pull out the RMM 4 Lite, then it goes up to...
View Articleraw ipmi command to retrieve NIC 1 MAC address on S2600GZ
Hi there, what is the right approach to retrieve the NIC 1 MAC address (for OS usage) via IPMI? NOTE: I am assuming the system is powered off and that a DHCP server assigned an IP address to the BMC...
View Articleintel workstation !!! where to go ? 何去何从 ?
我刚准备定制一台电影制片工作站，可是今年停产工作站主板了，这是怎么回事，官网也没发布替代方案，敬请释疑！ i am planning order a movie production workstation , but guess what , the last workstation board w2600cr will be discontinued in 2015 !and that is...
View ArticleDo RS2BL080 raid controller support 6TB SATA3 disks?
Hi, Do anyone know if RS2BL080 raid controller support new 6TB SATA3 disks? /Markku
View Articlespeed fans for my sc5299ws
Hi everyone... I have a problem, I build a serverboard s5520sc in the sc5299ws chassis, and now my fan speed are very very high, bios and firmware already update, somebody have idea for me? Thanks...
View ArticleMFSYS35 with Intel® Modular Server Storage Management Pack questions.
Hi, I need to convert a couple of RAD5 LUNS to RAID 10. We have not got the Intel® Modular Server Storage Management Pack. However I believe that I can use this for 30 days in evaluation. Are there any...
View Articleimpitool raw command for S2600CP FANs
Hi, Please let me know ipmitool raw command for controlling S2600CP Fans?Could you show me the examples of ipmitool raw command for controlling fans in S2600CP board? Thanks in advance,
View ArticleUnable to install Windows 2008 R2 on GPT partition.
One of my friends sent me an Intel s5500BC Server for troubleshooting. He installed a Seagate Barracuda 3TB hard disk in it. However, when he installed Windows Server 2008 R2 64-bit on it, the...
View ArticleClik here to view.
S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Hi all, I recently upgraded the firmware of a working S2600CP2 server running VMWare ESXi 5.5 build 1474528 and VMWare now gets stuck on the initialization of ACPI. After about a minute or two of...
View ArticleClik here to view.
RS2BL080 RAID 10
Hi all Have been searching for answer before I posted, have kind of found an answer but need some clarification as well. So I run a S5520HC board with RS2BL080 controller, I have the 4 and 6 drive hot...
View ArticleWhich command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View Articleboard s1200bts
Hello everybody! I have a board s1200bts, when power on it makes 1 long and 3 short beeps, then OS proceed, but applications hangs or shut down. Can anyone help? Thanks
View ArticleClik here to view.
Intel Modular Server NTP is not synchronized
We have a MFSYS25V2 Chassi with firmware 11.5 and three compute modules. The servers running on the IMS Virtualization Manager. It was configured a NTP time server.The NTP time will not be accepted by...
View ArticleWhich command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View ArticleClik here to view.
S2600-CW2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Hi there, I tried to install ESXi 5.5 on my S2600-CW2 board. The installation process breaks up on ACPI initialization and boot again.Upgrading to the latest Firmware 01.01.0005 (from 0003) didn't...
View Articlerste uninstall
Intel, how can RSTe be uninstalled from a system running Windows Server 2012 R2 Core?- There is no control panel- The installation executable does not have an uninstall option- The registry is not...
View ArticleWhich command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View ArticleClik here to view.
Raid Web Console will not send email if port 25 is blocked even when using a...
I have Raid Web Console on several deployed servers in different locations, and with our old email servers they were configured to send email via port 587 and this was working, but our email servers...
View ArticleFan speed still high after firmware update on Server System P4308CP4MHEN
The motherboard (a S2600CP4) is preinstalled in the system, so the cabling should be correct.When I first turned the system on. both fans ran at hight speed. After doing the firmware update, the top...
View Article