Quantcast
Channel: Intel Communities : All Content - Servers
Viewing all articles
Browse latest Browse all 3917

3TB with AXXRMS2LL080 and AXX6DRV3GEXP

$
0
0

Hi,

 

Im not sure if this is the right place.

 

I own intel s1200btl motherboard.

I have added a axxrms2ll080 card to it and using it with a AXX6DRV3GEXP disk expander.

 

Recently i bought 6 3tb disk ( WDC WD30EFRX-68EUZN0 ).

 

When i booted the server upp the lsi card said size 0 TB.

My os did see the disks, but i did get allot of error until the disk jumped out and i needed to reboot to see the disk again.

 

But there was no problem connecting the disk directly to AXXRMS2LL080 and the lsi said 3 TB at boot post.

 

Is there a limit in AXX6DRV3GEXP ?

 

please note i did update AXXRMS2LL080 and after that it said at post 3TB but disk still jumped out.

 

S.M.A.R.T info:

 

Error 56742 occurred at disk power-on lifetime: 56 hours (2 days + 8 hours)

  When the command that caused the error occurred, the device was active or idle.

 

 

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  04 61 0c 00 00 00 00  Device Fault; Error: ABRT

 

 

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  ef 03 0c 00 00 00 00 00   2d+08:54:29.482  SET FEATURES [Set transfer mode]

  e5 00 00 00 00 00 00 00   2d+08:54:29.482  CHECK POWER MODE

  ec 00 00 00 00 00 00 00   2d+08:54:29.482  IDENTIFY DEVICE

  ef 03 0c 00 00 00 00 00   2d+08:54:29.232  SET FEATURES [Set transfer mode]

  e5 00 00 00 00 00 00 00   2d+08:54:29.232  CHECK POWER MODE

 

 

 

This did not happen when i connected the drives directly to AXXRMS2LL080 .

 

Message was edited by: keivan shahin


Viewing all articles
Browse latest Browse all 3917

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>