Greetings,
I'm trying to install Debian Wheezy and the SAS/SATA connected hard disks are not being detected during the installation process. Below is the hardware I'm working with:
1) 2600COE server board (no C600 upgrade key)
4) 1 Tbyte Seagate Barracuda drives connected to the SAS/SATA ports
1) 120 Gbyte SSD attached to the SATA port
1) DVD attached to the SATA port.
I want to manage the disks through the operating system not via RSTe or ESRT2(LSI*), so the disks should just pass-through. I've tried all the settings under
BIOS SAS/SATA Capable Controller
without any luck. I've read about needing Redhat or Suse drivers but I'm installing Debian. Any thoughts?
Todd