Hi.
Suddenly received S5500BC from ebay for my ESXi home lab.
It came with two Xeon E5506, i removed them and put one E5649 into first cpu socket.
Although i put two 2Gb DDR3 ECC non Registered DIMMs into first and second memory slot.
I connect 2 NICs to my work network, in bios, in BMC settings i set to receive ip by DHCP.
After reboot i saw that ip is received, but i can't connect to BMC in Chrome, Safari or IE.
As i remember from configuration S1200BTL - without RMM i can access to web page where i can check my hardware status and other, does this board have this, or i lost my time?)
After that i update Bios, EFI, BMC to the latest version, nothing changes. I can saw server in my network, it receive packages, but i can't connect to it.
I tried to config BMC by Deployment Assistant, it saw only one (second) NIC and by configure with utility i had the same result...
Is any ideas?
RMM module isn't instaled.
Memory, CPU & PSU were perfectly working with old board.
No errors on boot.
System BIOS - 64
BMC Firmware - 00.61
ME Firmware - 1.12
FRUSDR - 22